| Technical
Specification: |
|
| |
|
| Engine |
4-cylinder-Kubota-diesel
engine, water-cooled
with electro starter
25,0 kW (34 PS) at 2600 rpm (DIN 70020) |
Fuel
Oil |
Diesel tank capacity
41 liters
Hydraulic oil tank approx. 75 litres |
| Electrical
Equipment |
Electrical Equipment |
| Steering |
Mechanical, turning
circle: 7,65 m |
| Drive
/ Brake System |
Hydrostatic, infinitely
variable speed from 0-20 km/h
Hydrostatic drive also serves as operating
brake
Hydrostatic lamella brakes (parking brake)
affecting on rear wheels |
| Tyres |
5.00 – 8
6 PR 5 bar |
| Compressor |
2-cylinder-BOGE-compressor,
mechanically driven, effective air supply
1060 litre./min. |
| Operating
Pressure |
7 bar, silenced |
| Thermoplastic
Container |
220 litres, heat
insulated, hydraulic agitator drive, automatic
ventilation and temperature control device,
which ensures the material to be laid at
the specified temperature. |
| Heating
System |
Gas heated, Heating
at tank transferred with the aid of an thermic
oil circulating pump. |
| Extruder
/ Screed Shoe |
Both options available |
| Marker
Unit |
Exchangeable shutters,
width min. 10 cm / max. 20 cm |
| Electronic
Interrupter |
Automatic, semi-automatic
and manual mode 8 programs (computerized),
electronic line length spacing device, safety-cut
off device |
| Laying
Speed |
With Extruder device
up to 6 km / hr.
With Screed device up to 1 km / hr. |
| Glass
Bead Container |
75 litres with
2 outlets (with Air pressure) |
| Glass
Bead Dispenser |
Vulkollan wheel
driven dispensing unit, which can define
the exact consumption and dispenses uniform
glass beads without getting affected by
the speed of marking. |
| Empty
Weight |
1200 kg |
| Front
Axle / Rear Axle |
250 kg / 950 kg |
| Admitted
Total Weight |
2300 kg |
| Front
Axle / Rear Axle |
700 kg / 1600 kg |
Dimensions
Length x Width x Height
|
3880 mm x 1380
mm x 2700 mm |
Thermoplastic Road Marking Machine
Automatic Machine
